Ud Command - Transfer Backup Data (Only For Ethernet) - ipf electronic opti-check Technical Documentation Manual

15.4.16 UD command – transfer backup data (only for Ethernet)
This function enables you to transfer backup data to the device.
NOTE
The device must be restarted following use of the UD command and successful transfer
of a backup, for example via the VB0000 command.
Example
Structure of the command PLC
Command Parameters
U D S
Update IP address
Device
S = static
D = DHCP
Parameters
2 5 5 . 2
15 characters ASCII
Subnet mask
Parameters
0 0 0 . 0
15 characters ASCII
Gateway
Parameters
1 1 V
2-Byte ASCII Hex Device name
Length of device
name
v2.8.2-K11
device
1 9 2 . 1
15 characters ASCII
IP address
5 5 . 2 5
0 0 . 0 0
S X F 2 0 0
6 8 . 0 0
5 . 0 0 0
0 . 0 0 0
M 1 0 W E
292/332
Technical Documentation
opti-check
0 . 2 5 0



- T E S T

ipf electronic GmbH
Lüdenscheid, Germany