Alarm Signal - ipf electronic opti-check Technical Documentation Manual

10.2.5 Alarm signal

You can define the conditions which cause an alarm to be initiated here. Alarm signals indicate that an
irregularity has occurred in the sensor.
The following causes may trigger the alarm:
Invalid trigger
Evaluation cancelled
prematurely
Error in job selection
Error at process interface
FTP client could not send all
files
v2.8.2-K11
Trigger during image acquisition, job switching or during parameter
setting via the process interface ("SP"-Datagram)
The result of computing was not present at the latest output time.
Invalid job number or job could not be loaded, e.g. because it is not
correctly configured.
An error occurred during data transfer to the process interface, e.g. an
invalid command is received.
An error occurred while transferring the images via the FTP client.
Possible causes could include: Device or server overloaded, incorrect
access details or server cannot be reached.
88/332
Technical Documentation
opti-check
ipf electronic GmbH
Lüdenscheid, Germany