ipf electronic opti-check Technical Documentation Manual page 185


Confirm your settings and return to the feature list with OK. Return to the feature list without making
any changes with Cancel.
This feature check has the following output values for the datagram at the process interface:
Output value
Result
Number of objects
Reference area brightness
List of centres
List of areas
List of structure values
List of lightness values
v2.8.2-K11
Data type
Integer
Integer
Float-Point list
Float-Point list
Integer list
Integer list
185/332
Technical Documentation
Description
Result of the feature check: "P"
(Pass); "F" (Fail)
Number of contour points within
the respective area (BLOB).
Average grey value within the
respective area.
opti-check
ipf electronic GmbH
Lüdenscheid, Germany