ipf electronic opti-check Technical Documentation Manual page 25

NOTE
For device communication via Ethernet, the following ports are used:



These ports must not be occupied by other programs or used for communication by the
process interface!
Check that these ports are enabled in your firewall! You can find details on this topic in the
firewall manufacturer's documentation.
v2.8.2-K11
Application Suite:
Web interface:
Process interface:
51972 (default setting, programmable)
80 („HTTP")
23 (default setting, programmable)
25/332
Technical Documentation
opti-check
ipf electronic GmbH
Lüdenscheid, Germany