Gm Command - Access Information About The Device - ipf electronic opti-check Technical Documentation Manual

15.4.6 GM command – access information about the device
This function enables you to access information about the connected device.
Example
Structure of the command PLC
Command Parameters
G M 0
Get Model
4 byte ASCII hex
Information
Access single elements
0001 = Device type
0002 = MAC address
0004 = Serial number
0008 = Firmware version
0010 = Hardware version
0020 = Device name
0040 = Manufacturer
0000 = All (in the order given above)
Structure of the Response PLC
Response
R M 0
Response 4 byte ASCII hex
Model mirrored parameters of the
Information GM request
v2.8.2-K11
device
0 4 0
device
0 4 0 0
4 byte ASCII hex
For each element:
Length of the result data
0 1 4
data
277/332
Technical Documentation
opti-check
ipf electronic GmbH
ipf electronic GmbH
Lüdenscheid, Germany