Ip Address / Network - ipf electronic opti-check Technical Documentation Manual

10.2.6 IP address / network

Set the IP address of the device here. There are two choices for this.

Static IP address
The device uses a set IP address.

DHCP (Dynamic Host Configuration Protocol)
If you have integrated a DHCP server in your network, the IP address is obtained there. If this does not
happen within a specific time and a timeout occurs, you can choose whether:
o
the last IP address obtained via DHCP is used
o
another fixed IP address is set
If the port 51.972 (standard) is already being used in your network, you may specify a different port for
communication between the connection of the device and the Application Suite.
NOTE
This port must also be set in the dialogue Connect to device - Options, in order to create a
connection.
v2.8.2-K11 89/332
Technical Documentation
opti-check
ipf electronic GmbH
Lüdenscheid, Germany