4 Correct Use
Depending on the device, the Vision Sensors in combination with the Application Suite software are used to
monitor and verify:
Completeness
Presence
Position
Correct position
Barcode and matrix code
Numbers and characters
Colour features
e.g. for objects passing the Vision Sensor on conveyor belts.
You can find an overview as to which Vision Sensors check which features under: Technical Data (Overview
of feature checks).
NOTE
The colour devices are suitable for tasks such as sorting objects by colour. They are not
suitable for measuring colours or determining colour deviations (ΔE).
NOTE
These devices are not suitable for use in the food sector as per EN 1672-2.
ATTENTION!
Only use the devices for its intended purpose! The guarantee becomes void in the case of
any application not described in the technical documentation!
v2.8.2-K11
12/332
Technical Documentation
opti-check
ipf electronic GmbH
Lüdenscheid, Germany
Need help?
Do you have a question about the opti-check and is the answer not in the manual?
Questions and answers