Gd Command - Retrieve Last Result - ipf electronic opti-check Technical Documentation Manual

15.4.3 GD command – retrieve last result
This function enables you to retrieve the result of the last feature check.
NOTE
You can set the content of the datagram for output via the process interface during job
creation under Configure interface → Output process interface.
Example
Structure of the command PLC
Command Parameters
G D
Get Data none
Structure of the Response PLC
Response
R D 0 0
Response 4 byte ASCII
Data hex
Length of the
result data
v2.8.2-K11
device
device
...
0 0
data
272/332
Technical Documentation
opti-check
ipf electronic GmbH
Lüdenscheid, Germany