Command Gb - Access Device Backup - ipf electronic opti-check Technical Documentation Manual

15.4.2 Command GB – access device backup
This function enables you to access a backup of the device with firmware or the job as well as the device
settings.
Example
Structure of the command PLC
Command Parameters
G B 0
Get 0000 = Backup with firmware
Backup 0001 = Only jobs and device settings
Structure of the Response PLC
Response
R B 0
Response 4 byte ASCII hex
Backup Parameters of the GB-
command
Error messages:
F001 = Device is not
F004 = Backup has already
F008 = Password protection
v2.8.2-K11
device
0 0 0
device
0 0 0
deactivated
been called
activated
0 0 0 4 F
8 Byte ASCII-Hex data length
(32bit)
For errors, the length is 0
271/332
Technical Documentation
...
6 1 6
data
ipf electronic GmbH
Lüdenscheid, Germany
opti-check