Using The Software; Shortcut Menus; Shortcut Keys - Micromeritics ASAP 2460 Operator's Manual

ASAP 2460 Operator's Manual

Using the Software

The software screens shown in this manual represent a six-port ASAP 2460 system.
The number of ports shown on the screens will differ according to the system
configuration (from two to six ports).

Shortcut Menus

Shortcut menus are available for:
• the instrument schematic when Manual Control is enabled. Refer to
4-14.
• onscreen graphs and tabular reports. Refer to

Shortcut Keys

Shortcut keys can be used to activate some menu commands. Shortcut keys or key combinations (when
applicable) are listed to the right of the menu item.
Another shortcut method of accessing a menu or function is to use the Alt key plus the underlined let-
ter in the menu command. For example, to access the File menu, press Alt + F. Then press the
underlined letter on the submenu. For example, Alt + F opens the File menu; then press O to access the
File Selector for opening files.
If the underscored letters do not display menus and windows, press the Alt key on the
keyboard.
246-42800-01 - Aug 2013
Enable Manual
Menus, page 5-20.
Report Shortcut
Using the Software
Control, page
1-11