Micromeritics ASAP 2460 Operator's Manual page 292

Appendix B
Action:
2516- Warning: Keeping a backup copy of the calibration data is recommended by
Micromeritics. Would you like to do so now?
Cause:
Action:
2517- Canceling this dialog will reset the calibration state to what it was when this
dialog was first opened. Are you sure you want to cancel?
Cause:
Action:
2520- No data points available for reporting.
Cause:
Action:
2521- Unable to program controller.
Cause:
Action:
2522- Invalid controller application file.
Cause:
Action:
2523- Programming the controller failed.
2524- CRC check failed on programming controller.
2525- Unknown error programming controller.
B-12
Calibration operations should only be done by or under the direction of
qualified service personnel.
You have performed a calibration operation; a backup copy is recom-
mended.
Perform a calibration
Save
You have not accepted the calibration you performed.
If the calibration operation was successful, press
No analysis file.
Choose another file.
A hardware malfunction has occurred.
Contact your local Micromeritics service representative.
The application's control file has been corrupted or deleted.
Reinstall the ASAP 2460 analysis program.
ASAP 2460 Operator's Manual
operation.
Accept
246-42800-01 - Dec 2013
.