Micromeritics ASAP 2460 Operator's Manual page 286

Appendix B
Action A:
Action B:
Action C:
2478- Error copying sequential data segment.
Cause:
Action:
2479- Cannot open (filename) because it is a (program) file.
Cause:
Action:
2480- File (file name) cannot be analyzed. It is currently being edited.
Cause:
Action:
2481- Error accessing the sample information file (file name (code #).
Cause A:
Action A:
Cause B:
Action B:
B-6
Run the Setup program and ensure that a valid port is specified; if not,
specify a valid one when prompted.
Reinstall the software, then restart application.
Contact your service representative if you continue to get this message.
An internal processing and/or hardware error occurred while accessing
a portion of a sample file.
Confirm that the media being accessed does not contain errors; for
example, you may wish to use a utility such as ScanDisk. Contact your
service representative if you continue to receive this error message.
You attempted to open a sample file (or parameter file) from another
application.
Choose a sample file from the proper application.
You attempted an analysis using a sample file that is being edited.
Save the changes and close the dialog box.
You attempted to open a file that is already open, possibly minimized.
View the minimized icons, locate and maximize the file.
A computer or network problem occurred.
Check the performance of your computer devices or network.
ASAP 2460 Operator's Manual
246-42800-01 - Dec 2013