Micromeritics ASAP 2460 Operator's Manual page 302

Appendix B
4031- Not enough points with a relative pressure in the range (n,n)
Cause:
Action:
4033- Not enough points to generate Dubinin Tabular Report.
Cause:
Action:
4034- Fewer than 2 points available for Dubinin calculations.
Cause:
Action:
4035- Cannot calculate optimized Astakhov exponent: Not enough points with a rel-
ative pressure in the range [(pressure), (pressure)].
Cause:
Action:
B-22
Fewer than two data points selected for the Dubinin report falls within
the selected relative pressure range.
Edit the calculation assignments or the fitted relative pressure range.
There are fewer than two valid data points available for the Dubinin
tabular reports.
Examine the calculation assignments in the Collected Data dialog of
the sample file. You must have at least two micropore pressures
selected for inclusion in the Dubinin report.
There are fewer than two valid data points available for Dubinin
reports in one of the sample files selected for overlaying.
Examine the calculation assignments in the Collected Data dialog of
the sample file. You must have at least two micropore pressures
selected for inclusion in the Dubinin report.
There are fewer than two valid data points in the relative pressure
range specified. Astakhov reports will not be produced.
Examine the calculation assignments in the Collected Data dialog for
the sample file. You must have at least two pressures in the given range
selected for inclusion in the Dubinin report.
ASAP 2460 Operator's Manual
246-42800-01 - Dec 2013