Micromeritics ASAP 2460 Operator's Manual page 291

ASAP 2460 Operator's Manual
Action:
2506- Sample file (filename) has "No Analysis" status and cannot be used for this
operation.
Cause:
Action:
2508- The selected file (filename) does not contains a valid script.
Cause:
Action:
2513- Unable to read the calibration file (file name).
Cause:
Action:
2514- Unable to write the calibration file (file name).
Cause:
Action A:
Action B:
2515- Warning: Changing the calibration information will affect the performance of
the instrument. Only qualified service personnel should do this. Do you wish to
proceed?
Cause:
246-42800-01 - Dec 2013
Contact your service representative.
The action you are trying to perform requires a file with collected data.
Choose a sample file containing collected data (Complete, Analyzing,
or Entered status).
The specified test file is invalid.
Choose another file.
You selected an invalid calibration file or one that cannot be read.
Be sure the media containing the calibration file has no problems.
An attempt to Save calibration data has failed due to possible media
problems.
Be sure the media you want to Save the file to has no problems.
Choose an alternate media to Save the calibration data.
You have started the process of performing a calibration operation.
Appendix B
B-11