Changing Fluid - Micromeritics ASAP 2460 Operator's Manual

Preventive Maintenance

Changing Fluid

Always drain the vacuum pump while the pump is warm and disconnected from
the power source.
1. Unplug the vacuum pump from the power source.
2. Loosen the wing nut on the clamp at the top of the oil vapor trap. Swing the clamp open and
remove the trap from the hose.
7-10
ASAP 2460 Operator's Manual
Disconnect hose
Clamp wing-nut
Oil-vapor trap
246-42800-01 - Aug 2013