High Throughput Analysis - Micromeritics ASAP 2460 Operator's Manual

Performing an Analysis
7. Click Start to start the analysis. A window displays data as they are collected. A short delay is
encountered before the port status at the bottom of the window changes from the Idle state.
8. If you wish to view an analysis report, click the appropriate
9. When the analysis is complete, the
another analysis. If you click

High Throughput Analysis

When you select this option, the High Throughput Analysis dialog is displayed. This dialog enables
you to start up to six analyses at the same time. Use the following guidelines for performing high
throughput analyses:
• All ports must be idle in order to start an analysis.
• All analyses must use the same analysis gas.
• All analyses that measure Psat must use the same Psat gas (which may be different from the analysis
gas).
• The sample dosing method should be Normal.
• From one to six analyses can be started at the same time.
Samples cannot be removed from or added to ports until the full set of analyses has completed.
2-44
button is displayed. Click
Next
, the first view of the Analysis dialog is displayed.
Next
ASAP 2460 Operator's Manual
Report buttons
button.
Report Port
to exit or
Close
246-42800-01 - Aug 2013
to perform
Next