Micromeritics ASAP 2460 Operator's Manual page 86

Generating Graph Overlays
5. On the Plot Overlay Sample Selection window, use one of the following options to move up to
25 files from the Available Files box to the Selected Files box.
• Double click a file name in the Available Files box to move the file to the Selected Files box.
To move a file from the Selected Files box back to the Available Files box, double click the
file name in the Selected Files box.
• Click a file name in the Available Files box. Click the Add button to move the selected file to
the Selected Files box. To move a file from the Selected Files box back to the Available Files
box, click a file name in the Selected Files box and click the Remove button. To select more
than one file, hold down the Ctrl key on the keyboard while selecting the files, or hold down
the Shift key to select a range of files.
6. Click OK.
7. To view the report, click the Preview button on the Sample Description window.
If the sample file has been closed, go to Reports > Start Report. Select the file used in the
previous steps and click Report. To select more than one file, hold down the Ctrl key on the
keyboard while selecting the files, or hold down the Shift key to select a range of files. Choose
the report destination on the Report Settings window and click OK. If only one file was selected
as an overlay, the Select Reports window displays. Verify the reports to generate and add or
remove reports as necessary. Click OK. If multiple files were selected, the Selected Reports
window will not display.
2-56
ASAP 2460 Operator's Manual
246-42800-01 - Aug 2013