Micromeritics ASAP 2460 Operator's Manual page 293

ASAP 2460 Operator's Manual
2526- Controller download was not successful.
2527- Controller CRC error on boot block.
2528- Controller DRAM error.
2529- Controller Com1: error.
2530- Controller Com2: error.
2531- Controller debug port error.
Cause:
Action:
2532- The instrument contains a different software version. Do you want to reset it?
Cause:
Action:
2533- Analyzer initialization failed.
Cause:
Action:
2542- The file (filename) could not be written. Check that the directory permissions
are correct.
Cause:
Action:
2548- System status 1 or 2.
Cause:
Action:
246-42800-01 - Dec 2013
An internal processing and/or hardware error has occurred.
Contact your service representative if you continue to receive this error
message.
The application has discovered a different version of software operat-
ing in the analyzer.
If there are no analyzers other than the ASAP 2460 connected to the
computer, select and allow the updated software to load.
Yes
An internal processing and/or hardware error has occurred.
Contact your service representative if you continue to receive this error
message.
The person logged into the computer does not have write access to the
program and/or data directory.
Have the system administrator of the computer set up proper privileges
for all users.
A hardware error has occurred.
Contact your service representative.
Appendix B
B-13