Micromeritics ASAP 2460 Operator's Manual page 296

Appendix B
2563- Cannot write. File or directory (file/directory name) read only.
Cause:
Action:
2572- File (filename) is already selected for the analysis.
Cause:
Action:
2585- The following libraries are missing: <library-name>, <library-name>, ....
Cause:
Action:
2586- Sample file [name] has no pressure table entries.
Cause:
Action:
2587- Sample file [name] has no dose incremental table entries.
Cause:
Action:
2599- The selected file has an extension that is not supported by this operation.
Cause:
Action:
B-16
The referenced file or directory is read-only. You cannot write to this
file.
Have the administrator of the computer set up proper read/write access
to the directories and files.
The file selected for HOA reporting cannot produce a valid report.
Choose a different sample file.
This message is triggered on application start up if any of the library
files used by an application, does not exist on disk.
Add the library into the Libraries folder.
An attempt was made to start an analysis with an empty target
pressure table.
Add target pressures to the pressure table in the analysis conditions.
An attempt was made to start an analysis with an empty dose
increment table.
Add dose increment entries to the dose increment table in the analysis
conditions.
The selected file does not havea a supprted file extension.
Open the adsorptive properties file. Open the FPI file selector and
select another file with a supported file extension.
ASAP 2460 Operator's Manual
246-42800-01 - Dec 2013