Micromeritics ASAP 2460 Operator's Manual page 282

Appendix B
2432- Invalid response from MMI 'FILE_READ' request.
Cause:
Action:
2433- New entries have been found in this directory. Refresh the directory
information?
Cause:
Action:
2434- File (file name) — Subset # (number) wrote (number) bytes, expected (number)
bytes.
Cause:
Action:
2438- Cannot open scheduling diagnostic data save file.
Cause:
Action:
2439- Could not register file.
2440- Subset not found.
2441- Seek within file failed.
2442- Bad header in subset file.
2443- Subset owner denied access.
B-2
An internal processing and/or hardware error has occurred.
Contact your service representative if you continue to receive this error
message.
Several ASAP 2460 files (sample information, analysis conditions,
adsorptive properties, or report options) have been added to this direc-
tory by some function other than the ASAP 2460 program.
to update the directory information with data from each new
Select
Yes
file. This operation may take a minute.
Select if you do not want to spend the time updating the directory
No
information. This option may be feasible if a large number of files have
been copied into the directory and you know the name of the file you
wish to access.
An internal processing and/or hardware error has occurred.
Contact your service representative if you continue to receive this error
message.
Could not create necessary files for running scheduled diagnostic tests.
1. Ensure that the disk is not write-protected.
2. Ensure that the hardware subdirectory (from the program
directory) exists.
ASAP 2460 Operator's Manual
246-42800-01 - Dec 2013