Micromeritics ASAP 2460 Operator's Manual page 272

Ordering Information
Part Number
004-25104-00
004-25913-00
290-25846-00
290-25846-01
004-25549-00
004-62230-58
004-33601-00
004-33602-00
004-62230-32
004-16821-00
004-16816-00
004-16843-00
004-16844-00
004-54609-00
240-25853-00
240-14855-00
240-32805-00
200-25840-00
004-25006-00
004-54618-00
260-25873-00
250-25608-00
250-25627-00
201-22600-00
003-22617-00
003-22617-01
8-2
Item and Description
Ferrule, rear, Nylon 1/4 in.
Ferrule set, 1/8-in. PEEK, used on gas lines
Copper tube, for gas inlet, 1/8-in. diameter, 6 ft.
Copper tube, for gas inlet, 1/8-in. diameter, 16 ft.
Reducer, 1/8-in. tube x 1/4-in. tube, accepts 1/8-in. tube, connects to
1/4-in. swage fittings
Gas pressure regulator assembly, CGA 580, no-pressure relief valve
(30 psig for N , He, Kr)
2
Regulator Expansion Kit; adds an additional outlet to the gas
regulator, includes fittings and instructions
Pressure Relief Kit; prevents excessive gas pressure in the event of
regulator failure (not to be used with noxious gases)
Gas pressure regulator, CGA 320 fitting (CO2), 30 psig
Reference material, high surface area
Reference material, low surface area (krypton)
Reference material, micropore, 13X
Reference material, micropore, Y-zeolite
Sample tube brush
Sample tube funnel
Sample tube rack
Sample tube support, assists sample weighing
o
Saturation pressure (p ) tube, includes isothermal jacket
O-ring, size 006, Buna-N, for p
Sample Port O-ring removal tool
Sample port plug
Valve gasket, Kel-F, for analysis manifold
Valve plunger, Buna-N seal, for analysis manifold
Valve spring, for Buna-N plunger, for analysis manifold
Valve, 0.25 orifice, 24 VDC 10-32MT
Valve, for gas inlet ports and saturation pressure ports
ASAP 2460 Operator's Manual
o
tube
246-42800-01 - Aug 2013