Micromeritics ASAP 2460 Operator's Manual page 73

ASAP 2460 Operator's Manual
2. Select Unit > Start Krypton Analysis. The Krypton Analysis window is displayed.
3. For each port to be used, either click Browse and select a sample information file or click New to
create a new sample information file.
4. Verify the information populated into the sample identification, Density, Mass, Sample + Tube,
and Empty Tube fields. This information is pulled from the selected or newly created file. The
Density value is applicable only if using the Calculate method for the free space determination.
5. Edit the p and Bath temperature fields, if necessary.
o
6. Click Report after analysis to automatically generate reports when the analysis is complete. On
the Report Settings window, select the report destination. Click OK to return to the previous
window.
246-42800-01 - Aug 2013
Performing an Analysis
2-43