Temkin Isotherm Report Options - Micromeritics ASAP 2460 Operator's Manual

ASAP 2460 Operator's Manual

Temkin Isotherm Report Options

The Temkin isotherm is used to model adsorption data where the heat of adsorption drops linearly with
increasing coverage. In the Selected Reports list box, highlight Temkin, then click Edit.
Field or Button
Specify monolayer
capacity checkbox and
text box
Specify differential
heat of adsorption
checkbox and text box
Tabular report
checkbox
Transform plot
checkbox
246-42800-01 - Aug 2013
Select and enter the monolayer capacity of the sample.
Select and enter the differential heat of adsorption at zero surface
coverage. This allows inclusion of all Temkin constants.
Use to have a report of the pressure points generated.
Plots a linear form of the Temkin transform plot.
• Overlay samples checkbox - use to overlay sample files on the
transform plot.
• Autoscale x-axis - the x-axis field shows the logarithm of pressure (ln).
• Autoscale y-axis- the y-axis field shows the quantity of gas adsorbed.
Description
Report Options Files
3-41