Defining Parameter Files; Sample Tube - Micromeritics ASAP 2460 Operator's Manual

Defining Parameter Files

Defining Parameter Files
The following file types can exist as part of the sample information file as well as individual parameter
files:
• Sample Tube Files
• Degas Conditions
• Analysis Conditions
• Adsorptive Properties
• Report Options
Default parameter files can be used for multiple analyses without having to re-enter the values each
time an analysis is performed.
Predefined parameter files are included with the program and can be edited as needed or new parame-
ter files can be created. The Replace button can be used to overwrite values from an existing file.
Changes can be made as needed to the new file while the original file remains unchanged.
This section describes how to define parameter files using the Open command. You can also define a
parameter file within a sample file using the Save as command.

Sample Tube

Sample Tube files specify information about the sample tube.
1. Go to File > Open. Select the Sample Tube library folder and enter a file name in the File name
field.
2. Click Open.
3. Click OK when prompted to create a new file.
2-16
.STB file extension
.DEG file extension
.ANC file extension
.ADP file extension
.RPO file extension
ASAP 2460 Operator's Manual
246-42800-01 - Aug 2013