Mdi Interface; Mdi Interaction Interface Is Shown Below - Adtech ADTECH4 CNC Series Maintenance Manual

9.3 MDI interface

MDI mode is mainly used for the writing and execution of single G code.
To enter MDI interface:
[Monitor]
In MDI interface, enter complete NC code instruction in edit mode, press the [Start] key in the edit mode
and confirm to execute directly.
To restore the default settings quickly, press and hold the [Reset] key for three seconds and choose to
reset or not.

MDI interaction interface is shown below:

ADTECH4 SeriesCNC Maintenance Manual
System Info Interface
[MDI]
MDI Interface