Adtech ADTECH4 CNC Series Maintenance Manual page 112

Unit
Authority
Default
Effective time
Note
035
T code form (compensation number digits)(L series)
Range
Unit
Authority
Default
Effective time
Note
036
IP address
037
Subnet mask
038
Default gateway
Range
Unit
Authority
Default
Effective time
Note
ADTECH4 SeriesCNC Maintenance Manual
:
: Operation admin
: G18 (L series)/G17 (M series)
: Instant
: Set the default processing plane to XY or XZ; modify the default plane,
so that it isn't need to specify the modal plane value while programming,
and write plane related instructions directly instead;
: 0~2
:
: Operation admin
: 2 (L series)
: Instant
: Used to set the T value in tool change instruction on lathe controller (L
series); the latter digits indicate the compensation number. In some
conventional programming, people usually use two digits to specify the
compensation number used by corresponding tool number;
For example: T0801 M06 indicates changing the #8 tool and
compensating with #1 length.
:
:
: Operation admin
: 192.168.0.123
255.255.255.0
192.168.0.1
: Restart
: It is used to configure the Ethernet network parameters, which should
match the actual network settings, or else it can't be normally accessed.