Adtech ADTECH4 CNC Series Maintenance Manual page 143

Authority
Default
Effective time
Note
018
Boot screen mode
Range
Unit
Authority
Default
Effective time
Note
019
Sys display axis setting (bit)
Range
Unit
Authority
Default
Effective time
Note
020
System debugging info enable
Range
Unit
Authority
: Operation admin
: 0 (Chinese)
: Instant
: Macro keyword effective parameter is used to set whether the macro
expression symbol set on the face is valid; 1: valid, 0: invalid.
: 0~6
: None
: Operation admin
: 1S
: Instant
: Used to configure logo display mode; if it is set to 0, press any key to enter
the system; for non-zero value, it enters into the system automatically after
corresponding time delay.
:
: None
: Super user
: XYZ
: Instant
: Used to configure the display axis of current system, and different display
combinations are available.
This configuration only determines the content of the interface. If the axis
function of the hardware exists, it still can output axis control during
programming, but the axis status won't be displayed. The status such as
axis limit and alarm will be ignored.
: 0~1
: None
: Super user
ADTECH4 SeriesCNC Maintenance Manual