Adtech ADTECH4 CNC Series Maintenance Manual page 45

1042
: Servo X drive alarm
1043
: Servo Y drive alarm
1044
: Servo Z drive alarm
1045
: Servo A drive alarm
Servo alarm; if the servo doesn't alarm, parameter P2.001~004 setting and actual servo alarm level
may be reverse. Please modify the parameters.
The corresponding function ports are IN34~37, which can be checked in input diagnosis.
1046
: Axis No. definition internal repeat error
Interface axis No. set by parameter P2.45~P2.49 is specified repeatedly
Principal axis isn't reset
1047
:
Mold isn't clamped
1048
:
1049
: System safety signal not in position error
1051
: System air pressure insufficient
1052
: System material clamping signal invalid alarm
ADTECH4 SeriesCNC Maintenance Manual