System Shortcuts - Adtech ADTECH4 CNC Series Maintenance Manual

4.8 System shortcuts

Numeric Input dialog box has two input methods: direct assignment and incremental assignment. Direct assignment
refers to assigning the entered number directly to the specified parameter, and incremental assignment refers to assigning the
sum of entered number and current value of the specified parameter to the parameter; Incremental input and direct input box
have symbols on the left: '=' represents direct input, '+' represents incremental input; the default mode is always direct
assignment; to change to incremental assignment, press the "UP/DOWN arrow" key.
In the [Monitor] screen, under [Position] menu, press the 'O' key to bring up the G-code O program number box to
quickly switch to O block. Press the "EOB" to confirm, and press "Cancel" to return.
In the [Monitor] screen, under [Position] menu, press '←', '→' in "Manual mode" to trim spindle speed quickly; if you
press and hold it, the speed value will be accumulated quickly. Note that this feature is available when the spindle is turned
on and the current spindle speed is not zero; if the current speed is 0, please first set it to non-zero value in MDI mode, and
then perform the shortcut operation.
ADTECH4 SeriesCNC Maintenance Manual