System info interface is shown below:
8.5. MDI interface
MDI mode is mainly used for the execution of single G code in certain occasions.
To enter MDI interface:
[Monitor]
[MDI]
In MDI interface, enter complete NC code instruction in edit mode, press the [Start] key in the edit mode
and confirm to execute directly.
To restore the default settings quickly, press and hold the [Reset] key for three seconds and choose to
reset or not.
MDI interaction interface is shown below:
43
BZ001M056A ADT‐DK300A/400A Engraving Machine
0.6.09
12‐07‐09 17:12:18
1.7
108
34
13
System Info Interface