Program Exchange Between Cnc System And Pc; System Operating Condition - Adtech ADTECH4 CNC Series Maintenance Manual

2.2.6. Program Exchange between CNC System and PC

Perform CAD/CAM/CAPP auxiliary programming with abundant software in PC, and then transmit CNC
program to the system through communication interface (USB disk, RS232 interface), or transmit the
programs from the system to PC.

2.3 System Operating Condition

Operating voltage
Operating temperature
Optimum operating temperature
Operating humidity
Optimum operating humidity
Storage temperature
Storage humidity
Operating environment
ADTECH4 SeriesCNC Maintenance Manual
24V DC (with filter)
0℃-45℃
5℃-40℃
10%-90% (no condensing)
20%-85%
0℃-50℃
10%-90%
No excessive dust, acid, alkali, corrosive and explosive gases, no strong
electromagnetic interference