Software Options Configuration; Connectivity Setup - GE LOGIQ e Basic Service Manual

Software Options configuration

Software Option installation introduction

Connectivity setup

LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6
Refer to the LOGIQ e Basic User Manual, Chapter 16,
Customizing Your System for information on configuring items
like Hospital, Department, Language, Units (of measure), Date,
Time and Date Format.
For information on configuring Software Options, Refer to the
LOGIQ e Basic User Manual, Chapter 16, Customizing Your
System.
For information on configuring DICOM Connectivity, Refer to the
LOGIQ e Basic User Manual, Chapter 16, Customizing Your
System.
To be able to use the network functions when connected to a
hospital network, the scanner must have a proper network
address.
• Before you can set up the scanner, you need to collect some
information.
• The Worksheet can be used for gathering this information.
• Typical source for this information is the network
administrator.
System Configuration
3-31