Level Simulation Mode - MultiTrode MultiSmart Installation & Operation Manual

MultiSmart Installation & Operation Manual
The changes ffect until the MultiSmart has been restarted.
Figure 74 – Restart Screen

9.4 Level Simulation Mode

9.4.1 Simulating Levels for Safety/Commissioning Purposes
The pump station manager can simulate levels for safety or commissioning purposes. This function allows
the level to be increased or decreased in 1% steps from the keypad. Using this feature to test the control
panel before it is installed at the pump station.
Navigate to the Level Simulation screen:
Figure 75 – Simulating Levels
MultiSmart_IO_Manual_A4_v2-22_R15.doc Page 63 of 201