Backing Up & Restoring Configuration Settings; Resetting Defaults - MultiTrode MultiSmart Installation & Operation Manual

MultiSmart Installation & Operation Manual
30 Backing Up & Restoring Configuration Settings
The MultiSmart automatically stores a copy of the previous settings anytime a change is made. It is also
possible to backup the current configuration to internal memory or to a compact flash card. Thus there are
three options when restoring the configuration settings:
Restore the previous settings
•
• Restore from the internal backup file
Restore from a CF card
•
If a flash card is inserted into the port, then multiple configurations can be saved. If no flash card is present
then only one backup can be saved.
WARNING:
BEFORE REMOVING THE COMPACT FLASH CARD, YOU MUST PRESS THE YELLOW SAVE CF
DATA BUTTON. FAILURE TO DO SO MAY CAUSE CORRUPTION OF DATA OR DAMAGE TO
THE FLASH CARD.
Backing up and restoring configuration settings is done from the Backup Options screen:
Figure 152 – Configuration Backup Options

30.1 Resetting Defaults

Pressing the Reset Defaults button displays the Setup Wizard as described in Section 9.
MultiSmart_IO_Manual_A4_v2-22_R15.doc Page 187 of 201