Remote Operation - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

Remote operation

This function executes remote operations (such as RUN, STOP, and RESET operations) to the station selected on the "CC-
Link IE TSN/CC-Link IE Field Diagnostics" window, from the engineering tool. (Remote operation for device stations is
available only for RESET.)
The displayed window varies depending on the station selected. For the operations with a module other than the Motion
module selected, refer to the manual for the module used.
Procedure
To perform remote operations, follow the steps below.
*1 To perform remote RESET, set "Remote Reset Setting" under "Operation Related Setting" of "CPU Parameter" to "Enable" in advance.
For details on the remote operations, refer to the user's manual for the CPU module used.
1.
Select the module where the remote operations are
performed in the "CC-Link IE TSN/CC-Link IE Field
Diagnostics" window.
2.
Click the [Remote Operation] button in the "CC-Link IE
TSN/CC-Link IE Field Diagnostics" window, or right-click a
module icon in the "Network Status" and click [Remote
Operation].
The "Remote Operation" window is displayed.
3.
Specify "Current Specified Station" in "Specify Execution
Target".
The remote operations are performed only to the CPU module
on the station selected in the CC-Link IE TSN/CC-Link IE Field
diagnostics.
4.
Select a remote operation (RUN, STOP, PAUSE, or
RESET) to be performed in "Operation" to the CPU
*1
module.
5.
Click the [Execute] button to perform the remote operation.
8 TROUBLESHOOTING
8.3 Checking the Network Status
8
137