Emissions - Still RX20 Series Original Instructions Manual

2
Safety

Emissions

Emissions
The values specified apply to a standard truck
(compare the specifications in the "Technical
data" chapter). Different tyres, lift masts,
additional units etc. may produce different
values.
Noise emissions
The values were determined based on
measuring procedures from the standard
EN 12053 "Safety of industrial trucks - Test
methods for measuring noise emissions",
based on EN 12001, EN ISO 3744 and the
requirements of EN ISO 4871.
This machine emits the following sound
pressure level:
Continuous sound pressure level in the
driver's compartment
Measurement
L
pAZ
uncertainty K
pA
< 66.3 dB(A) 4 dB(A)
The values were determined in the test cycle
on an identical machine from the weighted
values for operating statuses and idling.
Time proportions:
• Lifting 18%
• Idling 58%
• Driving 24%
However, the indicated noise levels at the
truck cannot be used to determine the noise
emissions at workplaces according to the most
recent version of Directive 2003/10/EC (daily
personal noise pollution). If necessary, these
noise emissions must be determined by the
operating company directly at the workplaces
under the actual conditions there (additional
noise sources, special application conditions,
sound reflections).
NOTE
Please observe the definition of the following
responsible person: "operating company".
66 56368011531 EN - 06/2019 - 02