Speed Restriction (Variant) - Still RX20 Series Original Instructions Manual

4
Traction

Speed restriction (variant)

The speed restriction (variant) is a function
that can be configured by the fleet manager.
It sets a maximum speed that can either be
permanent or be called up by the driver. This
function helps the driver to comply with speed
restrictions, e.g. in storage areas or specific
areas.
Switching the speed restriction on and off
– Press the button
The first menu level appears.
– Press the "Drive" softkey
The "Drive" menu appears.
– Press the "Speed restriction" softkey
The activation bar appears next to the symbol.
The speed restriction is switched on.
– To switch off the speed restriction, press the
softkey again.
Configuring the speed restriction
NOTE
Access to the settings menu is only available if
the truck is at a standstill and the parking brake
is applied. If the parking brake is released
prematurely, the settings menu will close.
Access is only granted when the password is
entered by the fleet manager.
– Stop the truck.
– Actuate the parking brake.
– Press the button
– Press the "Settings" softkey
The first menu level appears.
– Activate the "Access authorisation for the
fleet manager".
The "Settings menu" opens on the display.
– Press the
Truck settings
– Press the
Speed restriction
156
.
.
.
.
.
softkey .
softkey.
56368011531 EN - 06/2019 - 02
Operation