Cleaning The Truck; Note On Flame Proof Enclosures - Still RX20 Series Original Instructions Manual

Electric truck cat. 2gd/3gd for use in potentially explosive areas
Table of Contents

Advertisement

4

Cleaning the truck

Cleaning the truck
Note on flame proof enclosures
Depending on the category of the truck, it can
be equipped with one or more flame proof en-
closures. These flame proof enclosures con-
tain components of the truck control unit and
other electrical and electronic components.
CAUTION
If water penetrates the electrical
system, there is a risk of a short circuit
occurring!
The flame proof enclosures have a
narrow gap that could allow water to
penetrate.
– Do not use high-pressure cleaning
equipment.
Cleaning the truck
DANGER
Risk of explosion!
Working on a truck within potentially
explosive areas can lead to explosions
in the surrounding atmosphere.
No work must be performed on the
truck in potentially explosive areas!
– Trucks must only be cleaned
outside potentially explosive areas.
DANGER
Risk of fire due to flammable cleaning
materials!
Flammable cleaning materials can be
ignited by hot components.
– Do not use any flammable cleaning
materials.
DANGER
Risk of fire due to flammable materi-
als!
Deposits and solids can be ignited by
hot components, e.g. drive units.
– Remove deposits and solids.
342
56368011531 EN - 06/2019 - 02
Operation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RX20 Series and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF