Procedure In Emergencies; Emergency Shutdown - Still RX20 Series Original Instructions Manual

4

Procedure in emergencies

Procedure in emergencies

Emergency shutdown

WARNING
No electric braking assistance is available if the
emergency off switch or the battery isolating switch
has been actuated.
Actuating the emergency off switch (1) disconnects
the drives from the power supply. Actuating the
battery isolating switch (2) disconnects the entire
truck from the power supply.
The truck will not be held on a slope by the regene-
rative brake.
– To brake, actuate the service brake.
CAUTION
Potential for damage to the battery male connector!
If the battery male connector is disconnected while
the truck is switched on (under load), an arc will be
produced. This can lead to erosion at the contacts,
which considerably shortens the service life of the
contacts.
– Switch off the truck before the battery male
connector is disconnected.
– Do not disconnect the battery male connector
while the truck is switched on, except in an
emergency.
In an emergency, all functions of the truck can
be shut down:
– Press the emergency off switch (1) or turn
the battery isolating switch (2) to "OFF".
In drive mode, pressing the emergency off
switch (1) or turning the battery isolating
switch (2) has the following effects:
• No reduction in truck speed when the
accelerator pedal is released, according
to the drive programme selected. The truck
will coast to a stop.
• The electric brake does not function during
the first part of brake pedal travel:
To decelerate the truck with the mechanical
brake, the brake pedal has to be pressed
down further.
• The truck can only be held on a slope using
the mechanical brake, not the electric
brake.
296 56368011531 EN - 06/2019 - 02
Operation
2
6219_901-014