Clamp Locking Mechanism (Variant) - Still RX20 Series Original Instructions Manual

4
Attachments
– Release shift key "F" (4).
NOTE
The pictograms are affixed according to
the attachment fitted at the factory. If an
attachment with different functions is fitted,
the authorised service centre must check that
the pictograms bear the correct representation
and must change them if necessary.

Clamp locking mechanism (variant)

This truck can be fitted with a clamp locking
mechanism for clamping attachments. This
prevents the clamp from opening unintention-
ally if the operating function is inadvertently
triggered.
DANGER
If the correct function of the clamp locking mecha-
nism is not guaranteed, there is a risk to life from a
falling load!
If other attachments are used on this truck in addi-
tion to the clamp, make sure that the function of the
clamp locking mechanism is reassigned to the cor-
responding operating device every time the clamp
is refitted. See the section entitled "Fitting attach-
ments".
– Make sure that the additional clamp locking
mechanism function is available.
NOTE
For technical reasons, clamping attachments
must not be controlled via the "5th function".
Multi-lever
NOTE
For technical reasons, no clamp locking
mechanism is available for the multi-lever
operating device.
252 56368011531 EN - 06/2019 - 02
Operation