Lifting And Jacking Up; Working At The Front Of The Truck - Still RX20 Series Original Instructions Manual

5
Safety regulations for maintenance

Lifting and jacking up

DANGER
There is a risk to life if the truck tips over!
If not raised and jacked up properly, the truck may
tip over and fall off. Only the hoists specified in the
workshop manual for this truck are allowed and are
tested for the necessary safety and load capacity.
– Only have the truck raised and jacked up by the
authorised service centre.
– Only jack the truck up at the points specified in
the workshop manual.
The truck must be raised and jacked up for
various types of maintenance work. The
authorised service centre must be informed
that this is to take place. Safe handling of
the truck and the corresponding hoists is
described in the truck's workshop manual.

Working at the front of the truck

DANGER
Risk of accident due to an unsecured lift mast.
If the lift mast or fork carriage is raised, no work may
be performed on the lift mast or at the front of the
truck unless the appropriate safety measures are
put in place.
– When securing, only use chains with sufficient
load-bearing capacity.
– Contact the authorised service centre regarding
this matter.
CAUTION
Possibility of damage to the ceiling!
– Note the maximum lift height of the lift mast.
358 56368011531 EN - 06/2019 - 02
Maintenance