Checking The Battery; Adjusting The Warning Zone Light - Still RX20 Series Original Instructions Manual

Maintenance
WARNING
Risk of crushing!
Do not actuate the steering during lubrication.
– Switch on the truck.
– Actuate the steering.
– Park the truck safely again.
– Repeat the lubrication procedure.
NOTE
Please note: the more often the truck is
cleaned, the more frequently it must be
lubricated.

Checking the battery

– For information on checking the battery, see
the chapter entitled "Checking the battery
condition, acid level and acid density".

Adjusting the warning zone light

– Switch on the truck.
– Make sure that the parking brake is applied.
– Loosen the nuts (2) to adjust each headlight.
– Adjust the headlight (1).
The distance from the light bar to the truck
must be between 70...75 cm.
– Re-tighten the nuts (2).
56368011531 EN - 06/2019 - 02
Preserving operational readiness
5
1
2
6219_003-230
389