Roadways - Still RX20 Series Original Instructions Manual

Electric truck cat. 2gd/3gd for use in potentially explosive areas

Table of Contents

Roadways

Dimensions of roadways and aisle widths

The following dimensions and aisle width

requirements apply under the speciﬁed

conditions to ensure safe manoeuvring. In

each case, a check must be performed to

determine whether a larger aisle width is

necessary, e.g. in the case of deviating load

dimensions, attachments, lift masts and tow

Within the EU, "Council Directive 89/654/EEC

concerning the minimum safety and health

requirements for the workplace" must be

observed. The respective national guidelines

apply for areas outside the EU.

The required aisle widths depend on the

dimensions of the load.

Required aisle widths with pallet

The truck may only be used on driveways that

do not have curves that are too tight, have

gradients that are too steep, and entrances

that are not too narrow or low.

56368011531 EN - 06/2019 - 02

Aisle width [mm]

Do you have a question about the RX20 Series and is the answer not in the manual?