Nameplate Of The Pressure-Tight Housing; Production Number - Still RX20 Series Original Instructions Manual

1
Your truck
Nameplate of the pressure-tight
housing
The pressure-tight housings are marked with a
nameplate. The data on the plate corresponds
to the approved area of application for the
pressure-tight housing. The plate must be
positioned so that it is always easy to read.
Only the manufacturer is allowed to re-label
the pressure-tight housings.
A note is printed on the label: "To avoid the
ignition of combustible gases or vapours, do
not remove the cover when the circuits are
active or in potentially explosive areas."
In close proximity to the nameplate there is a
warning sign: "Open only in a non-potentially
explosive area".

Production number

NOTE
The production number is used to identify the
truck. It can be found on the nameplate and
must be referred to in all technical questions.
The production number contains the following
coded information:
(1) Production location
(2) Model
(3) Year of manufacture
(4) Sequential number
14
6
5
1
2
3
4
5
6
xx xxxx x xxxxx
56368011531 EN - 06/2019 - 02
1
Serial number
CE labelling
Year of manufacture
Approved area of application
Inspection number
Manufacturer
1
2
3
4
Foreword
2
3
4
5060_901-020
7090_921-004