Battery Specifications - Still RX20 Series Original Instructions Manual

6
Battery specifications
Battery specifications
DANGER
There is a risk of explosion from
using a battery with the incorrect
specification!
Using batteries that do not correspond
to explosion-protection regulations
may lead to explosions in the sur-
rounding atmosphere in potentially
explosive areas!
– Use only batteries that are appro-
ved and tested for the place of use.
CAUTION
The battery weight and the battery dimensions
affect the stability of the truck.
When replacing the battery, the weight ratios
must not be changed. The battery weight must
remain within the weight range specified on the
nameplate. The location of ballast weights must not
be changed. The bottom of the battery tray must be
closed.
– Do not change the position of ballast weights.
– Check the battery weight against the information
on the nameplate.
– Only use a battery tray that is closed at the
bottom.
NOTE
The batteries for this truck are designed for
the special area of application. If a battery is to
be exchanged or replaced, use a structurally
identical explosion-protected battery with
the same characteristics. If a battery is
replaced with a battery of a different type,
check that the truck is permitted to be used
in the corresponding explosion-protection
zones.
– The battery weight can be found on the
nameplate of the battery.
426 56368011531 EN - 06/2019 - 02
Technical data