Selecting Load Programs 1 To 3 - Still RX20 Series Original Instructions Manual

4
Lifting

Selecting load programs 1 to 3

The truck has three load programs for the
different lifting behaviours of the fork carriage
and the lift mast. The higher the number of the
load program selected, the greater the load
dynamics.
Differences between the load programs
• Load program 1:
66% lifting speed
• Load program 2:
85% lifting speed
• Load program 3:
100% lifting speed
The lifting behaviour of the truck is selected via
the display-operating unit under the "Load"
menu item.
– Press the ... softkey to select the
desired load program.
– If the load programs are saved as a favourite
on a softkey, press the "Load dynamics"
softkey until the number of the desired load
program is shown on the display.
The number of dynamic bar segments shows
the load dynamics of the selected load pro-
gram.
178 56368011531 EN - 06/2019 - 02
Operation