Use After Storage Or Decommissioning - Still RX20 Series Original Instructions Manual

Electric truck cat. 2gd/3gd for use in potentially explosive areas
Table of Contents

Advertisement

Operation
service centre to find out about additional
courses of action.
Use after storage or decommission-
ing
If the truck has been decommissioned for
longer than six months it must be checked
carefully before being used again. As with the
annual safety inspection, this inspection must
also include all safety-related aspects of the
truck.
– Clean the truck thoroughly; see the chapter
entitled "Cleaning the truck".
– Lubricate the joints and actuators.
– Check the battery condition, acid level and
acid density.
– Check the hydraulic oil for condensation
water. Change the hydraulic oil if neces-
sary.
– Arrange for the authorised service centre
to perform the same inspections and
tasks that were carried out before initial
commissioning.
– The explosion protection inspection must
be performed by the authorised service
centre.
– Perform the "visual inspections and func-
tional checks".
The following points in particular must be
checked:
• Drive
• Controller
• Steering
• Brakes (service brake, parking brake)
• Lifting system (lifting accessories, load
chains, mounting)
NOTE
For further information, see the workshop
manual for the truck or contact the authorised
service centre.
56368011531 EN - 06/2019 - 02
4
Decommissioning
353

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RX20 Series and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF