Special Risks Associated With Using The Truck And Attachments - Still RX20 Series Original Instructions Manual

2
Residual risk
– Always transport unstable loads in suitable
containers.
– Always drive slowly when cornering.
– Drive with the load lowered.
– Even with sideshifts, align the load as
centrally as possible with the truck and
transport in this position.
– Avoid turning and diagonally driving across
slopes or gradients.
– Never have the load facing downhill when
travelling on slopes or gradients.
– Pick up only loads of the approved width.
– Do not transport swinging loads.
– Always take great care when transporting
suspended loads.
– Do not drive over ramp edges or steps.
Special risks associated with using
the truck and attachments
DANGER
Risk of explosion!
Working within potentially explosive
areas with attachments that do not
comply with explosion-protection
regulations can lead to explosions
in the surrounding atmosphere!
– Only operate attachments that
comply with the explosion-protec-
tion regulations.
– Check the area of application
by comparing with nameplate
information on the attachments.
– If the area of application is not clear,
ask a safety officer.
Approval from the manufacturer and attach-
ment manufacturer must be obtained each
time the truck is used in a manner that falls
outside the scope of normal use, and in cases
where the driver is not certain that he can use
the truck correctly and without the risk of acci-
dents.
52 56368011531 EN - 06/2019 - 02
Safety