Traction; Safety Regulations When Driving - Still RX20 Series Original Instructions Manual

Operation

Traction

Safety regulations when driving

Driving conduct
The driver must follow the public rules of the
road when driving in company traffic.
The speed must be appropriate to the local
conditions.
For example, the driver must drive slowly
around corners, in tight passageways, when
driving through swing-doors, at blind spots, or
on uneven surfaces.
The driver must always maintain a safe
braking distance from vehicles and persons in
front, and must always have the truck under
control. Stopping suddenly, turning quickly
and overtaking at dangerous or blind spots
must be avoided.
– Initial driving practice must be carried out in
an empty space or on a clear roadway.
The following are forbidden during driving:
• Allowing arms and legs to hang outside the
truck
• Leaning the body over the outer contour of
the truck
• Climbing out of the truck
• Moving the driver's seat
• Adjusting the steering column
• Releasing the seat belt
• Disabling the restraint system
• Raising the load higher than 300 mm
above the ground (with the exception
of manoeuvring processes during the
placement into stock/removal from stock
of loads)
• Using electronic devices, for example
radios, mobile phones etc.
56368011531 EN - 06/2019 - 02
4
Traction
133