Danger Area - Still RX20 Series Original Instructions Manual

4
Handling loads
DANGER
Risk of accident from a falling load!
When transporting small items, attach a load safety
guard (variant) to prevent the load from falling on
the driver.
A closed roof covering (variant) should also be
used.
Removable roof panels may not be removed.
Adjusting the fork
– Lift the locking lever (1) and move the fork
arms to the desired position.
– Allow the locking lever to snap back into
place.
The load centre of gravity must be midway
between the fork arms.
– Only actuate the fork prong positioner
(variant) when the fork is not carrying a
load.

Danger area

The danger area is the area in which people
are at risk due to the movements of the truck,
its working equipment, its load-carrying
equipment (e.g. attachments) or the load.
Also included are the areas where loads
could fall or working equipment could fall or
be lowered.
DANGER
Risk of injury!
– Do not step on the fork.
DANGER
Risk of injury!
– Do not step under the raised forks.
192 56368011531 EN - 06/2019 - 02
Operation
1
6210_842-001